Stainless Steel Flanges

Product Details:

We offer our clients the highest grade of Stainless Steel 316 Flanges that are truly in conformation to the latest market demands. The flanges are used in an assortment of industrial purposes and are mainly used to connect pipes. These are considered as an important entity to support mechanical parts. The flanges available in our company are customized in designs, sizes & shapes. Different applications of these flanges include hydraulic control systems for turbine generators, high pressure ground support missile systems, nuclear & conventional power plant applications & many more.

Range:

• 15 NB upto 600 NB in 150 LBS, 300 LBS, 400 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS / Table 2.5, Table 6, Table 10, Table 16, Table 25, Table 40, Table 64, Table 160, Table 320, Table 400

Form:

• Slip on, socket weld, blind, lapped, screwed, weld neck, reducing, spectacle, slip on boss, plate, plate blank, screwed boss.

Product Details:

Flange types

According to the connection way between the pipe and flange, the flange can be divided into the following five basic types:

Slip on SO Flange
Weld Neck WN Flange
Socket Welding Flange
Thread Flange
Blind Flange
DN Flange

Slip-on Flange

 

The slip on flange welding also simplified as SO flange. It is used by inserting the pipe into the inner hole of flange, as the flange inner diameter is little bigger than the pipe’s OD, the parts could be connected by lap welding at the top and bottom of the flange. Slip on steel pipe flange is normally with raised face (RF) or flat face (FF), and also available in TG and MFM.

Most used pipe flange

Slip on pipe flange is suitable for the lower pressure, general temperature and normal circumstance pipelines. It is easy to install and with lower cost/price, has been most used in the common industries.

Weld Neck Flange

 

Weld neck flange (WN flange) usually has two kinds of designs. High-hub flange and tapered-hub flange, former one is the regular type and used in connecting pipelines. The neck of welding neck flange can be directly welded to the pipe end. WN flange has the advantage of convenient construction, high strength and good sealing performances. It is also widely used in different pressure pipelines.

Threaded Flange

 

Threaded flange is the flange with threads in it’s inner surface, as to connect the threaded pipe. The advantage of this connection type is non-welding, so it is very convenient to install, and easy to repair. Threaded flange could be made of alloy steel, which has higher strength but bad welding performances. On the other hand, it could not used in extreme conditions as the temperature mroe than 260  or lower than -45 to avoid leakage.

Socket Weld Flange

 

Socket weld flange (SW flange) is similar to the slip on flange, but the different part is is socket weld flange one side welded with the steel pipe, and the other side is connected with studs. Generally SW flange is used for small diameter pipes.

Lap Joint Pipe Flange

 

The lap joint pipe flange is that set the flange on the pipe end by using steel ring and flanging. The flange could be moved at the end of the pipe. Steel ring or flanging is the sealing surface, with flange to press them together. Because of the steel ring or the flanging block, the lap joint flange will not contact with the liquid. So it is applicable to corrosion resistant pipelines.

Blind Flange

 

Blind flange is like a solid disk without whole in the middle, only with mounting holes (for connecting purposes) functioned to block off the pipelines to stop the flows.

Sealing types

According to different pipeline pressure and seal gasket type, there are different sealing surface types for steel pipe flange.

Flat face (FF) pipe flange

 

Raised face (RF) pipe flange

Sealing surface structure is simple and smooth, and easy for machining. Meanwhile it’s easy to carry out anti-corrosion lining.
However, the contact area is larger, the gasket will become squeeze on both sides easily as pre-loading. Then it will not easy to press.

Male-female (M/F) face flange

It is composed of a convex and concave surface, placing the gasket on the concave. It can prevent the gasket from being extruded. So Male-female face flanges can be applied to the higher pressure occasions.

Tongue-groove (T/G) face steel flange

The touch surface is made of tongue and groove. The gasket is placed in the slot, and it cannot be squeezed.
Comparing RF and MFM, T/G face flange can obtain good sealing effect. The structure and manufacturing of flange are more complex.
It is difficult to replace the gasket in the slot. Tongue and groove seal face is suitable for flammable, explosive, toxic medium and high pressure occasions.

Product Details:

Material:

• Stainless Steel Weld Neck Flanges :ASTM A 182, A 240 F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H,904L
• Carbon Steel Weld Neck Flanges: ASTM / ASME A/SA 105 ASTM / ASME A 350 , ASTM A 181 LF 2 / A516 Gr.70 A36, A694 F42, F46, F52, F60, F65, F70
• Alloy Steel Weld Neck Flanges: ASTM / ASME A/SA 182 & A 387 F1, F5, F9, F11, F12, F22, F91
• Duplex Steel Weld Neck Flanges: ASTM / ASME A/SA 182 F 44, F 45, F51, F 53, F 55, F 60, F 61
• Nickel Alloy Weld Neck Flanges: Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22, C276, Copper Nickel, Hastelloy, Nickel, Monel, Inconel, Alloy20.
• Standard: ANSI : ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48 ,JIS,DIN,BS4504,SABS1123,EN1092-1, UNI,AS2129,GOST-12820 DIN : DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673 B.S : BS4504 , BS4504, BS1560, BS10

Specifications:

• Class: 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, DIN Standard ND-6,10, 16, 25, 40 Etc.
• Size: 1/2-78 inch (DN15-DN2000)
• Pressure: ANSI class 150, 300, 600, 1500, 2500, DIN PN6, PN10, PN16, PN25, PN40, PN64, PN100, PN160
• Surface Treatment: Anti-rust Oil, Transparent /Yellow /Black Anti-rust Paint, Zinc, Hot dipped Galvanized.
• Usage: Oil Field, Offshore, Water System, Shipbuilding, Natural Gas, Electric Pow

Product Details:

To meet the diverse requirements of our prestigious clients, we are involved in offering Stainless Steel Blind Flange  . This is fabricated using supreme class stainless steel with the help of the latest technology at par with international standards.

As an acclaimed endeavor of the business, Nascent Pipe & Tube is associated with offering a huge range of Stainless Steel 304 Round Bars (SS 304 Blind flanges) as a producer, exporter, stockiest and provider to our household and worldwide customers. Stainless Steel 304 flanges is austenitic steel by methods for having non-attractive highlights in the toughened structure that offers phenomenal consumption protection from both barometrical and substance exposures, in the organization of a lifted protection from oxidation.

Product Details:

Flanges types

According to the connection way between the pipe and flange, the flange can be divided into the following five basic types:

Slip on SO Flange
Weld Neck WN Flange
Socket Welding Flange
Thread Flange
Blind Flange
DN Flange

Slip-on Flange

 

The slip on flange welding also simplified as SO flange. It is used by inserting the pipe into the inner hole of flange, as the flange inner diameter is little bigger than the pipe’s OD, the parts could be connected by lap welding at the top and bottom of the flange. Slip on steel pipe flange is normally with raised face (RF) or flat face (FF), and also available in TG and MFM.

Most used pipe flange

Slip on pipe flange is suitable for the lower pressure, general temperature and normal circumstance pipelines. It is easy to install and with lower cost/price, has been most used in the common industries.

Weld Neck Flange

 

Weld neck flange (WN flange) usually has two kinds of designs. High-hub flange and tapered-hub flange, former one is the regular type and used in connecting pipelines. The neck of welding neck flange can be directly welded to the pipe end. WN flange has the advantage of convenient construction, high strength and good sealing performances. It is also widely used in different pressure pipelines.

Threaded Flange

 

Threaded flange is the flange with threads in it’s inner surface, as to connect the threaded pipe. The advantage of this connection type is non-welding, so it is very convenient to install, and easy to repair. Threaded flange could be made of alloy steel, which has higher strength but bad welding performances. On the other hand, it could not used in extreme conditions as the temperature mroe than 260  or lower than -45 to avoid leakage.

Socket Weld Flange

 

Socket weld flange (SW flange) is similar to the slip on flange, but the different part is is socket weld flange one side welded with the steel pipe, and the other side is connected with studs. Generally SW flange is used for small diameter pipes.

Lap Joint Pipe Flange

 

The lap joint pipe flange is that set the flange on the pipe end by using steel ring and flanging. The flange could be moved at the end of the pipe. Steel ring or flanging is the sealing surface, with flange to press them together. Because of the steel ring or the flanging block, the lap joint flange will not contact with the liquid. So it is applicable to corrosion resistant pipelines.

Blind Flange

 

Blind flange is like a solid disk without whole in the middle, only with mounting holes (for connecting purposes) functioned to block off the pipelines to stop the flows.

Sealing types

According to different pipeline pressure and seal gasket type, there are different sealing surface types for steel pipe flange.

Flat face (FF) pipe flange

 

Raised face (RF) pipe flange

Sealing surface structure is simple and smooth, and easy for machining. Meanwhile it’s easy to carry out anti-corrosion lining.
However, the contact area is larger, the gasket will become squeeze on both sides easily as pre-loading. Then it will not easy to press.

Male-female (M/F) face flange

It is composed of a convex and concave surface, placing the gasket on the concave. It can prevent the gasket from being extruded. So Male-female face flanges can be applied to the higher pressure occasions.

Tongue-groove (T/G) face steel flange

The touch surface is made of tongue and groove. The gasket is placed in the slot, and it cannot be squeezed.
Comparing RF and MFM, T/G face flange can obtain good sealing effect. The structure and manufacturing of flange are more complex.
It is difficult to replace the gasket in the slot. Tongue and groove seal face is suitable for flammable, explosive, toxic medium and high pressure occasions.

Product Details:

 

Weld Neck Flange supplier, ASME B16.47 Series a En 1092-1 Type 11 Welding Neck Flange manufacturers, View ANSI B16.5 Class 150 Forged Weld Neck Flange Dimensions, Check Din 2633 Weld Neck Flange Pn16 Price List.

Prestige quality WNRF Flange manufacturers in India offer these Carbon Steel Raised Face Weld Neck Flange in DIN, EN, BS, ISO, JIS or ANSI standard. Excel Metal is an ISO certified Stainless Steel Reducing Weld Neck Flange manufacturer & class 150 long weld neck flange distributor in India

Product Details:

Kanak Metal a is renowned manufacturer of Stainless Steel RTJ Flanges approved by Saudi Aramco. We are stockist of Raised Faced Ring Type Joint Flanges. Steel Mart India stock wide range of ANSI B16.5 Ring Type Joint Flanges, ASME B16.47 Series A and B RTJ Flanges in various sizes and range.

Product Details:

The flanges available in our company are customized in designs, sizes & shapes. Different applications of these flanges include hydraulic control systems for turbine generators, high pressure ground support missile systems, nuclear & conventional power plant applications & many more.

Range:

• 15 NB upto 600 NB in 150 LBS, 300 LBS, 400 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS / Table 2.5, Table 6, Table 10, Table 16, Table 25, Table 40, Table 64, Table 160, Table 320, Table 400

Form:

• Slip on, socket weld, blind, lapped, screwed, weld neck, reducing, spectacle, slip on boss, plate, plate blank, screwed boss.

Product Details:

Orifice Flanges are used with orifice meters for the purpose of measuring the flow rate of either liquids or gases in the respective pipeline. Orifice flanges generally come with either raised faces or RTJ (Ring Type Joint) facings. They are, for all intensive purposes, the same as weld neck and slip-on flanges with extra machining. They have modifications of radial tapped holes in the flange ring for meter connections and orifice plate carriers for the reason of fitting meter connections. The additional bolts act as a jack to allow the separation of the two flanges to change the orifice plate or for other inspection services. KANAK METAL. offers these flanges in stainless steel material. For carbon steel, We not only stock certain sizes of this flange, but has been a reputable source for them for over thirty years. We usually supply the plate, pressure connection holes, and jack screws with the orifice flange unit (which is usually two flanges mated together and ready for use) Please contact our sales department with additional questions on orifice flanges.

Key Features:

• Available with raised face or RTJ face
• Used for flow/rate metering of piping systems
• SFF can supply the plate, pressure connection holes, and jack screws with the orifice flange uni

Orifice Flanges are used with orifice meters for the purpose of measuring the flow rate of either liquids or gases in the respective pipeline. Pairs of pressure "Tappings", mostly on 2 sides, directly opposite each other, are machined into the orifice flange. This makes separate orifice carriers or tappings in the pipe wall unnecessary.

Orifice Flanges generally come with either Raised Faces or RTJ (Ring Type Joint) facings. They are, for all intensive purposes, the same as weld neck and slip on flanges with extra machining.

The image on the right shows a set Orifice Flanges, where a Orifice Plate is mounted and a jack screw is machined. This jack screw is used to facilitate separating the flanges for inspection or replacement of the Orifice Plate and gaskets.

The range of orifice flanges covers all standard sizes and ranges, and all common flange materials. Flanges are available in Welding Neck, Slip On, and Threaded form, and are typically supplied with two 1/2" NPT tappings in each flange.

ASME B16.36 covers Dimensions and dimensional tolerances from orifice flanges (similar to those covered in ASME B16.5) that have orifice pressure differential connections. Coverage is limited to the following flanges:

• WELDING NECK CLASSES 300, 400, 600, 900, 1500, 2500
• SLIP ON CLASS 300
• THREADED CLASS 300

Additional Information:

• Item Code: KM4321
• Production Capacity: As Per Requirement
• Delivery Time: Ready stock
• Packaging Details: Best packing

Product Details:

Kanak Metal s the chief manufacturer and supplier of Pipe Flanges throughout India and globally. Flange used to connect the pipe with various equipment and valves. We manufacture a variety of flanges that generally come with Flat Face, Raised Face and Ring Joint (RTJ) Flange face finish in compliance with national and international standar

Product Details:

We work to please our valuable customers with our excellent quality product range. Our Stainless Steel Plate Flanges is perfect in dimension and flawlessly finished. Our offered range of products including Stainless Steel Plate Flanges is obtained after the use of superior quality raw material processed in high advanced machinery and equipments. We have given extra fine finishing to our final product range to attain maximum satisfaction of our clients. Moreover, our clients can avail this product from us at industrial leading rates and customized packaging.

Features:

• Unmatched quality
• High grade material
• Thrifty prices

Product Details:

Stainless Steel Threaded Flange Suppliers & Exporters. It is been manufactured by using high quality raw materials. SS Threaded Flange is used to connect other threaded components in low pressure, non critical applications. Threaded flange can be attached to the pipe without welding & it is also applicable in high voltage areas where welding is hazardous.

Other Details:

• Stainless Steel Threaded Flange Class; 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
• Stainless Steel Threaded Flange Grade
• ASTM A182 Threaded Flange; ASTM A182 F304 Threaded Flange, ASTM A182 F304L Threaded Flange, ASTM A182 F304H Threaded Flange, ASTM A182 F310 Threaded Flange, ASTM A182 F310S Threaded Flange, ASTM A182 F316 Threaded Flange, ASTM A182 F316L Threaded Flange, ASTM A182 F316Ti Threaded Flange, ASTM A182 F317 Threaded Flange, ASTM A182 F321 Threaded Flange,ASTM A182 F321H Threaded Flange, ASTM A182 F347 Threaded Flange, ASTM A182 F347H Threaded Flange, ASTM A182 F904L Threaded Flange.

Product Details:

is an ISO manufacturer, Forged Flanges besides being their exporter to the Middle Eastern and European countries. A Stainless Steel Forged Flange can be defined as a metal disc, installed at the back of a tube, valve or any other object. It allows simple fitting and replacement of a piping system. They undergo the forging process whereby mechanical, energy is applied to a steel flange, to change its shape when in a solid state. ANSI B16.5 Forged Flanges possess a better impact strength than Cast flanges and are stronger and reliable. We are suppliers of Titanium, Alloy Steel, Carbon Steel, Monel, Nickel, CuproNickel, Stainless Steel and Inconel Forged Flanges to the chemical units, Oil and refineries, shipbuilding, petrochemicals and gas processing and distribution centres.

ASTM A182 SS Forged Flange, Alloy Steel Forged Plate Flanges, Manufacturer of Forged Forged Flanges, ASME B16.47 Series A and B Forged Flanges, Nickel Alloy 200 Forged Flange, Carbon Steel Forged Flange, Forged Flange Dimensions, MSS SP-44 Forged Flanges in Mumbai, India.Stockholder Of DIN86029 PN10 Forged Flanges, Best Price of Duplex Steel Forged Flanges, Copper Nickel Forged Flanges Exporter, Inconel Forged Flanges, Hastelloy C22 Forged Flange, Class 300, 600, 900, 1500 Forged Flanges Wholesaler, Alloy 20 Forged Flanges Traders in India.Standard Specification For Forged Flanges

 

Dimensions : ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings

Size : 1/2" (15 NB) to 48" (1200NB)

Class : 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, DIN Standard ND-6,10, 16, 25, 40 Etc.

DIN : DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636,DIN2637, DIN2638, DIN2673

BS : BS4504 , BS4504, BS1560, BS10

Flange Face Type : Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)

 

Material & Grades of Forged Flanges :

Stainless Steel Forged Flanges :
ASTM A 182, A 240 F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H, 904L

Duplex & Super Duplex Steel Forged Flanges :
ASTM / ASME A/SA 182 F 44, F 45, F51, F 53, F 55, F 60, F 61

 

Product Details:

ASME B16.5 Slip On Flange Dimensions Class 150 To 2500, Refer ASTM A182 F304 Slip On Flange Price List And Specifications.

 

A flange can be described as a method of connecting pipes. A slip-on flange is mainly used for low-pressure fluids that have minimal risk of leakage. Stainless Steel Slip On Flange is commonly used in water lines, low-pressure compressed airlines, etc. The ASME B16.5 Slip On Flange is a standard trusted by different industries for quality and safety. These standard flanges are used in various industries like oil and gas, petrochemical, firefighting water lines, etc.

The ASTM A182 F304 Slip On Flange is another commonly used flange with Chromium and Nickel in the stainless steel. The 18% Cr and 8% Ni makes these flanges more durable. The Stainless Steel 316L Slip-On Flanges have molybdenum added, improving the resistance towards general corrosion and chloride ion solution. The ANSI B 16.5 Class 150 Slip-On Flange Dimensions covers parameters like materials, pressure, and temperature ratings, The 150 SS Slip On Flange has characteristics such as thickness, diameter, and length. These characteristics, along with the weight of the flange, are taken into account for global manufacturing and engineering.

The ASTM A182 F304L SORF Flange is a raised face slip-on flange made with 304L materials. The slip-on flange allows the pipe to easily slip on them, whereas the raised face helps maximum attachment. The BS4504 Large Diameter Slip On Flange helps in quick access and easy inspection of pipelines, making the overall pipeline work more convenie 

Table Of Content

•   Stainless Steel Slip On Flange Dimensions
•  ANSI B 16.5 Class 150 Slip On Flange Dimensions
•  Class 300 Slip On Flange Dimensions In Mm
•  ASME B16.5 Slip On Flange Class 400 Dimensions
•  Class 600 Slip On Flange Dimensions
•  Class 900 Slip On Flange Dimensions
•  ANSI B16.5 Slip On Flange Class 1500 Dimensions
•  Class 2500 Slip On Flange Dimensions In MM
•  SS Slip On Flange Price List
•  Stainless Steel Slip On Flange Thickness Calculation
•  ASME B16.5 Slip On Flange Bolt Size
•  Stainless Steel Slip On Flange Specifications
•  Stainless Steel Slip On Flange Weight
•  ASTM A182 F304 SORF Flange Size Chart
•  BS4504 PN16 304 SS Slip On Flange Tolerances Table
•  Awwa C207 Class E 316 SS Slip On Flange Torque Chart
•  150# Slip On Flange Pressure Rating
•  Stainless Steel Slip On 304L Flanges Ring Gasket Chart
•  EN 1092-1 SS SORF Pipe Flanges Application For Use
•  Slip On Reducing Flange Dimensions
•  ASME B16 47 Slip On Flange Dimensions
•  Large Diameter Slip On Flange Dimensions
•  Slip On Raised Face Flange Dimensions
•  Slip On Flat Face Flange Dimensions
•  Slip On RTJ Flange Dimensions
•  Stainless Steel Slip On Plate Flange Dimensions
•  Specialise In Distributing Type Of Stainless Steel Slip On Flange
• pecialise In Distributing Type Of Stainless Steel Slip On FlangeASME B16.5 Slip On Flange WeldingASTM A182 F304 Slip On Pipe FlangessA182 316 SS Slip On Raised Face FlangesStainless Steel Reducing Slip On Flanges
  
  SA182 F304L Slip On Flat Face FlangesStainless Slip Joint FlangeStainless Steel 316L Slip On Plate FlangeDin 2501 Flange Steel Welding Slip On
  Asme B16.5 Sorf Plate FlangesDn100 Pn16 Slip On Flange Asme B16.5Class 600 Slip On Threaded FlangeAwwa C207 Class D Slip On Flange

Additional Information:

• Production Capacity: 5000

Product Details:

 ASTM A182 FLANGES, ASME SA182 FLANGES, SS A182 FLANGE IN GRADE F304, F304L, F304H, F310, F310S, F316, F316L, F316TI, F317L, F321, F347, F904L ETC. MANUFACTURER IN INDIA.

 is an ISO 9001:2015, PED/27/EC and OHSAS 18001:2007 Approved Manufacturer of ASTM A182 Flanges in Specification in Types Like ASTM A182 Weldneck Flange, ASTM A182 Blind Flange, ASTM A182 Socketweld Flange, ASTM A182 Slip On Flange, ASTM A182 Threaded Flange, ASTM A182 Laped Joint Flange, ASTM A182 Screw Flange, ASTM A182 Plate Flange, ASTM A182 WNRF Flange, ASTM A182 BLRF Flange, ASTM A182 SWRF Flange, ASTM A182 SORF Flange etc.Kanak Metal Manufacturer and Exporter of ASTM A182 Flanges in Dimension accordance with ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092-1, DIN, etc. Certified with NACE, PWHT, HIC, SSC, Magnetic Particle Test, Dye Penereteration Test etc.ASTM A182 Stainless Steel Flanges / ASME SA182 Stainless Steel Flanges - Content

• What is ASTM A182 Flanges
• ASTM A182 Flanges Available Range
• ASTM A182 Flanges Chemical Composition
• ASTM A182 Flanges Work Pressure
• ASTM A182 Flanges Price
• ASTM A182 Flanges Manufacturer, Mill Name and Origin
• ASTM A182 Flanges Application and Usage
• ASTM A182 Flanges Available Offer and Discount Best Price
• ASTM A182 Flanges Types
• ASTM A182 Flanges Packing and Shipment
• ASTM A182 Flanges Export Countries
• ASTM A182 Flanges Supplying States and Cities
• ASTM A182 
• Stainless Steel Flanges 
• ASTM A182 Flanges Types

   

  • ASTM A182 Welding Neck Flange
  • ASTM A182 Slip On Flange
  • ASTM A182 Socket Weld Flange
  • ASTM A182 Lap Joint Flange
  • ASTM A182 Threaded Flange
  • ASTM A182 Blind Flange
  • ASTM A182 Orifice Flanges
  • ASTM A182 Long Welding Neck Flanges
  • ASTM A182 Weldoflange
  • ASTM A182 Nipoflange
  • ASTM A182 Expander Flange
  • ASTM A182 Reducing Flange
  • ASTM A182 WNRF Flange
  • ASTM A182 SORF Flange
  • ASTM A182 SWRF Flange
  • ASTM A182 BLRF Flange

Additional Information:

• Item Code: A182
• Production Capacity: 200
• Delivery Time: As Per Client Order
• Packaging Details: Wooden Box Strong Packings

Product Details:

 Kanak Metal is Manufacturer, Supplier and Exporter of high Quality Weld Neck Flanges. Weld Neck Flanges are usually used in high pressure systems and are suitable for cold or hot temperatures. Also, we can produce as per your drawings and specifications.

 

ANSI B16.5 Weld Neck Flanges, ASME B16.47 Weld Neck Flanges, DIN Weld Neck Flanges Manufacturer & Supplier in india.WELD NECK FLANGES SPECIFICATION :

Standard - ANSI/ASME : ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48

DIN : DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673

B.S : BS4504, BS4504, BS1560, BS10

Size : 1/2" (15 NB) to 48" (1200NB)

Class : 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, DIN Standard ND-6,10, 16, 25, 40 Etc.

Specialize :As per drawing

WELD NECK FLANGES MATERIAL & GRADES :

Stainless Steel Weld Neck Flanges : ASTM A182, A240 F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H, 904L

Carbon Steel Weld Neck Flanges : ASTM / ASME A/SA 105 ASTM / ASME A 350 , ASTM A 181 LF 2 / A516 Gr.70 A36, A694 F42, F46, F52, F60, F65, F70

Alloy Steel Weld Neck Flanges : ASTM / ASME A/SA 182 & A 387 F1, F5, F9, F11, F12, F22, F91

Duplex Steel Weld Neck Flanges : ASTM / ASME A/SA 182 F 44, F 45, F51, F 53, F 55, F 60, F 61

Super Duplex Weld Neck Flanges : ASTM / ASME A/SA 182, A240 F 44, F 45, F51, F 53, F 55, F 60, F 61

Nickel Alloy Weld Neck Flanges : Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020), Titanium (Grade I & II)

Copper Alloy Weld Neck Flanges : UNS No. C10100, 10200, 10300, 10800, 12000, 12200, 70600, 71500, UNS No. C 70600 (Cu -Ni- 90/10), C 71500 (Cu-Ni-70/30)

Low Temperature Carbon Steel Weld Neck Flanges : ASTM A350, LF2, LF3

WELD NECK / WNRF FLANGES DIMENSIONS :

ANSI, ASME, ASA, B16.5 WELDING NECK FLANGE RF
OTE :
1. Class 150 flanges except Lap Joint will be furnished with 0.06 (1.6mm) raised face, which is included in ‘Thickness’ (C) and ‘Length through Hub’ (Y1), (Y3).
2. For Slip-on, Threaded, Socket Welding and Lap Joint Flanges, the hubs can be shaped either vertical from base to top or tapered within the limits of 7 degrees.
3. Blind Flanges may be made with the same hub as that used for Slip-on Flanges or without hub.
4. The gasket surface and backside (bearing surface for bolting) are made parallel within 1 degree. To accomplish parallelism, spot facing is carried out according to MSS SP-9, without reducing thickness (C).
5. Depth of Socket (D) is covered by ANSI B 16.5 only in sizes through 3 inch, over 3 inch is at the manufacturer’s option.
6. Welding Neck Flange Bore Size SCH10, SCH20, SCH30, STD, SCH40, SCH60, SCH80, SCH100, SCH 120, SCH140, SCH160, XS

MARKING & PACKING

Our products like flanges are packaged to make sure that there’s no damage throughout transit. Just in case of exports, customary export packaging is completed in wooden boxes or cases. All flanges are marked with Trademark (Company’s LOGO), Grade, Size and Lot No. On requests we can do custom marking on our products.

TEST CERTIFICATES

Manufacturer Test Certificate as per EN 10204-3.1, EN 10204-3.2, Raw Materials Certificate, NABL approved Lab 

Additional Information:

• Production Capacity: 5000

Product Details:

We are the leading supplier of Long Weld Neck Flanges.
Long Neck Welding (abbreviated LWN) flanges are similar to a standard Welding Neck flange, but the “Neck” is considerably longer. Long weld neck flanges, also called LWN flange, are similar to standard weld neck flanges but the neck is considerably longer.
Specifications:
Product TypeLong Neck Weld Flanges, ASME 16.5 Long Weld Neck Flanges / LWNSize½” (15 NB) to 36″ (900NB)Pressure Class150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBSStainless Steel Long Neck Weld FlangesASTM A 182, A 240 F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H,904LCarbon Steel Long Neck Weld FlangesASTM / ASME A/SA 105 ASTM / ASME A 350 , ASTM A 181 LF 2 / A516 Gr.70 A36, A694 F42, F46, F52, F60, F65, F70Alloy Steel Long Neck Weld FlangesASTM / ASME A/SA 182 A 387 F1, F5, F9, F11, F12, F22, F91Duplex Steel Long Neck Weld FlangesASTM / ASME A/SA 182 F 44, F 45, F51, F 53, F 55, F 60, F 61SpecializeAs per drawingStandardANSI : ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
DIN : DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642,DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673 Flanges  Weld Neck Flanges – WNRF, Socket Weld Flanges – SWRF, Slip On Raise Face – SORF, Blind RaiseFace- BLRF, Spectacle Blind, Ring Joint, Large Dia Flanges, Orifice Flanges, Girth Flange, Lap Joint Flanges, Screwed (Threaded) Flanges, Long Weld Neck Flanges,

Additional Information:

• Item Code: LWF
• Production Capacity: As Per Size
• Delivery Time: AS PER QTY
• Packaging Details: WOOODEN BOX

Product Details:

Stainless Steel Lap Joint Flanges, Stainless Steel SORF Flanges, SS Plate Flanges, SS Spectacle Blind Flanges, ASTM A182 SS Pipe Flanges, Stainless Steel Threaded Flanges, Stainless Steel Socket Weld Flange, SS Flanges Manufacturers in Indiass flanges suppliers, stainless steel flanges price in Mumbai, stainless steel flanges cost, stainless steel flanges price, stainless steel plate flanges price, astm A182 stainless steel flanges price list in india.

A Flange is another most essential component in Piping applications. In Piping applications, Flange are used to connect valves, pipes, pumps, and other equipment. Flanges can be connected using welding and screwing methods. Flanges are used by bolting together two flanges with a gasket between them, which offer tight sealing. Flanges provide easy access for activities like testing, cleaning, or assembling.

We, Seamac Piping Solutions Inc., are manufacturing and supplying Flanges in a wide range to complete industrial applications smoothly. By considering the demands of different industries, we fabricate various products like Pipes, Fittings, and Flanges. Flanges are one of our best-selling and most demanded components. We manufacture Flanges in multiple sizes, dimensions, and materials.

Kanak Metal carries a wide range of stainless steel flanges in a variety of lengths, ODs, IDs, size and wall thicknesses to meet your project’s needs—including flanges in dimension as per ASTM ,ASME B16.5, B16.47, B16.48 and weight-kg. per mtr. weight & thickness of stainless steel flanges We supply Stainless Steel Flanges that join different sections of the pipe. These Stainless Steel Flanges are suitable for high-temperature applications and also suitable in high corrosion applications. These Flanges are available in different specifications, but we also provide custom made Flanges. We are providing our high-grade Stainless Steel Flanges for applications in the oil and gas industry, marine industry, mechanical engineering, and wastewater management.

The Stainless Steel Flanges has numerous beneficial features such as high strength, corrosion resistance ability, good weldability, toughness, ductility, formability, high mechanical strength, anti-corrosive, and flexibility. Our Stainless Steel Flanges are suitable for high and low-temperature operations. We manufacture these Flanges by using the highest quality alloy. We are following all national and international standards to deliver perfectly suitable Flanges to our clients. 

Stainless Steel Flanges Specifications

Specification : ASTM A182 / ASME SA182

Dimension Standard : ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc.

Standard : ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc.

Size : 1/2" (15 NB) to 48" (1200NB)

Class / Pressure : 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.

Flange Face Type : Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)

DIN Flanges : DIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673.

JIS Flanges : JIS B2220 5K, JIS B2220 10K, JIS B2220 16K, JIS B2220 20K

BS Flanges : BS4504 PN 6, BS 4504 PN 10, BS4504 PN 16, BS4504 PN 25, BS4504 PN 40, BS 4504 PN 64, BS 4504 PN 100, BS 4504 PN 160, BS 4504 PN 250, BS 10, BS Table D, BS Table E, BS Table F, BS Table H.is focusing on to offer an exactly suitable solution to our clients within the decided time. At affordable rates, we provide a smooth and convenient doorstep service. The production of Flanges is done under the supervision of experts and quality testers who has expertise in the same field. Toa avoid defects and to deliver precise Flanges, we test them at different stages. To ensure damage-free delivery, we use  

Product Details:

Welding neck Flange Rexino Stainless weld neck Flanges, WN forged Flange, welding-neck Flanges in forged steel, Stainless Steel, AS,CS etc.B16.5 Welding Neck Flange 150lb

• B16.5 Welding Neck Flange 300lb
• B16.5 Welding Neck Flange 600lb
• B16.5 Welding Neck Flange 900lb
• B16.5 Welding Neck Flange 1500lb
• B16.5 Welding Neck Flange 2500lb
• B16.47 Ser.B (API)Welding Neck Flange 75lb
• B16.47 Ser.B (API)Welding Neck Flange 150lb
• B16.47 Ser.B (API)Welding Neck Flange 300lb
• B16.47 Ser.B (API)Welding Neck Flange 600lb
• B16.47 Ser.B (API)Welding Neck Flange 900lb
• B16.47 Ser.A (MSS SP44) Welding Neck Flange 150lb
• B16.47 Ser.A (MSS SP44) Welding Neck Flange 300lb
• B16.47 Ser.A (MSS SP44) Welding Neck Flange 600lb
• B16.47 Ser.A (MSS SP44) Welding Neck Flange 900lb

Description of Weld Neck Flanges

• Type: WN Forged Flange
• Material: Carbon steel: A105,SS400,SF440 RST37.2,S235JRG2,P250GH,C22.8, Stainless Steel: F304 F304L F316 F316L 316Ti, Copper etc.
• Standard: ANSI,JIS,DIN,BS4504,SABS1123,EN1092-1, UNI,AS2129,GOST-12820
• Size: 1/2-78 inch (DN15-DN2000)
• Pressure: ANSI class 150,300,600,1500,2500, DIN PN6,PN10,PN16,PN25,PN40,PN64,PN100,PN160
• Packing: No Fumigate or Fumigate Plywood/Wood Pallet or Case
• Surface Treatment: Anti-rust Oil, Transparent/Yellow/Black Anti-rust Paint,Zinc,Hot dipped Galvanized.
• E-catalogue: Available , please visit catalogue of flange
• Usage: Oil Field, Offshore, Water System, Shipbuilding, Natural Gas, Electric Power, Pipe Projects etc.

We are largest manufacturers of Weld Neck Flanges & have huge stock of 304 Weld Neck Flanges, 316 Weld Neck Flanges, astm a105 Weld Neck Flanges, astm a182 Weld Neck Flanges as per asme / ansi B16.5 Weld Neck flanges, ansi B16.47 Weld Neck flanges, Din Weld Neck flanges, jis Weld Neck flanges & uni Weld Neck flanges StandardsBest Price of Forged Flanges in all size, classes & dimensions like Class 150 Weld Neck Flanges, Class 300 Weld Neck Flanges, Class 600 Weld Neck Flanges, Class 900 Weld Neck Flanges, Class 1500 Weld Neck Flanges & Class 2500 Weld Neck Flanges,WN flange, Weld neck Flanges, steel valve, flanges bolts, steel flanges, steel forgings range of flange and forging types and sizesWeld Neck Flanges / WNRF Flanges

Weld Neck Flanges Price

Leading manufacturer of Weld Neck Flanges

Our Live Stock of Weld Neck Flanges

Weld Neck Flanges Application

  Stainless Steel Weld Neck Flanges

• Material:
  Stainless Steel Weld Neck Flanges :ASTM A 182, A 240 F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H,904L
  Carbon Steel Weld Neck Flanges: ASTM / ASME A/SA 105 ASTM / ASME A 350 , ASTM A 181 LF 2 / A516 Gr.70 A36, A694 F42, F46, F52, F60, F65, F70
  Alloy Steel Weld Neck Flanges: ASTM / ASME A/SA 182 & A 387 F1, F5, F9, F11, F12, F22, F91
  Duplex Steel Weld Neck Flanges: ASTM / ASME A/SA 182 F 44, F 45, F51, F 53, F 55, F 60, F 61
  Nickel Alloy Weld Neck Flanges: Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22, C276, Copper Nickel, Hastelloy, Nickel, Monel, Inconel, Alloy20.
• Standard: ANSI : ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48 ,JIS,DIN,BS4504,SABS1123,EN1092-1, UNI,AS2129,GOST-12820
  DIN : DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673
  B.S : BS4504 , BS4504, BS1560, BS10
• Class: 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, DIN Standard ND-6,10, 16, 25, 

Product Details:

Socket Weld Flanges / SWRF FlangesSocket Weld Flanges are used only for high pressure and temperature applications upto diameters of 1 ½” only. This creates a smooth bore with the proper welding and grinding. Socket Welding Flanges were initially developed for use on smaller sizes of pipe at higher pressure ratings.

 

ANSI B16.5 Socket Weld Flanges, ASME B16.47 (SWRF) DIN Socket Welding Flanges Manufacturer & Supplier in india.SOCKET WELDING FLANGES SPECIFICATION :

Standard - ANSI/ASME : ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48

DIN : DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673

B.S : BS4504, BS4504, BS1560, BS10

Size : 1/2" (15 NB) to 48" (1200NB)

Class : 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, DIN Standard ND-6,10, 16, 25, 40 Etc.

SOCKET WELD FLANGES MATERIAL & GRADES :

Stainless Steel Socket Weld Flanges : ASTM A182, A240 F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H, 904L

Carbon Steel Socket Weld Flanges : ASTM / ASME A/SA 105 ASTM / ASME A 350 , ASTM A 181 LF 2 / A516 Gr.70 A36, A694 F42, F46, F52, F60, F65, F70

Alloy Steel Socket Weld Flanges : ASTM / ASME A/SA 182 & A 387 F1, F5, F9, F11, F12, F22, F91

Duplex Steel Socket Weld Flanges : ASTM / ASME A/SA 182 F 44, F 45, F51, F 53, F 55, F 60, F 61

Super Duplex Socket Weld Flanges : ASTM / ASME A/SA 182, A240 F 44, F 45, F51, F 53, F 55, F 60, F 61

Nickel Alloy Socket Weld Flanges : Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020), Titanium (Grade I & II)

Copper Alloy Socket Weld Flanges : UNS No. C10100, 10200, 10300, 10800, 12000, 12200, 70600, 71500, UNS No. C 70600 (Cu -Ni- 90/10), C 71500 (Cu-Ni-70/30)

MARKING & PACKINGOur products like flanges are packaged to make sure that there’s no damage throughout transit. Just in case of exports, customary export packaging is completed in wooden boxes or cases. All flanges are marked with Trademark (Company’s LOGO), Grade, Size and Lot No. On requests we can do custom marking on our products.

TEST CERTIFICATESManufacturer Test Certificate as per EN 10204-3.1, EN 10204-3.2, Raw Materials Certificate, NABL approved Lab Test Report, 100% Radiography Test Report, Third Party Inspection Report etc.Manufacturer of 304/ 316 Stainless Steel Socket Weld Flange and Nickel Alloy Socket Weld Raised Face Flange in RTJ Type and FF/ RF Face

Size: 1/2" (15 NB) to 48" (1200NB)

Standards: ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings

Pressure Ratings: Class 150, Class 300, Class 400, Class 600, Class 900, Class1500, Class 2500 | PN6, PN10, PN16, PN25, PN40, PN64 etc.

Carbon Steel Socket Weld Flanges/ SWRF flanges Flanges: ASTM A105/A105N, A350 LF1, LF2 CL1/CL2, LF3 CL1/CL2, A694 F42, F46, F48, F50, F52, F56, F60, F65, F70, A516.60, 65, 70 (Spectacle Blind Flange, Spacer Ring/Spade Flange), Steel RST37.2, C22.8

Stainless Steel Socket Weld Flanges/ SWRF flanges Flanges: ASTM A182 F202, F304/304L/304H, F316/316L, F316H, F316TI, F310, F321, F904L

 

Special Alloy Socket Weld Flanges/ SWRF flanges Flanges: Duplex, Super Duplex, Nickel Alloys

Flange Face Type: Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)

 

Additional Information:

• Item Code: SSWF
• Production Capacity: 200
• Delivery Time: AS PER QTY
• Packaging Details: STRONG PACKING

Product Details:

Manufacturer/Exporter Of High Spectacle Blind FlangesStainless Steel Spectacle Blind Flanges, Alloy Steel Spectacle Blind Flanges Manufacturer & Exporter.

Spectacle Blinds are generally applied to permanently separating pipesystems, or just to connect with each other. A Spectacle Blind is a steel plate cut into two discs of a certain thickness.

The two discs are attached to each other by section of steel similar to the nose piece of a pair of glasses. One of the discs is a solid plate, and the other is a ring, whose inside diameter is equal to that of a flange.

The wide range of Spectacle Flanges offered by us is available in quality stainless steel and alloys. These Flanges is available in various size, grades, Specification & thickness as per the clients requirments. These flanges widely used in various application industry like waterworks, petrochemicals, refineries, chemical industry and construction works etc.

Dimensions Blind Flanges & Stud Bolts ASME B16.5

Spectacle Blinds be applied in systems, which regularly need to be separated from other installations. Normally, a Spectacle Blind is mounted in the "open" position so that flow through the pipe is possible. If the Spectacle Blind in the "close" position is rotated, the pipe is blanked off and no flow is possible.

Maintenance on a pipesystem can be a reason to rotate the spectacle in the "close" position. This run will take place through the hole, that is drilled in the connection piece. By loosening of all bolts, and partial removal of their, the Spectacle Blind can be rotated. After replacing the gaskets (new gaskets are to recommend), the bolts can be re-assembled and tightened.

Nickel Alloys Flanges

UNS 2200, 2201, 4400, 6600, 6601, 6625, 8020, 8825, 10276.

Duplex & Super Duplex Flanges

A 182 F 44, F45, F51, F53, F55, F60, F61

Stainless Steel Flanges

A 182 / A 240 304/L, 310, 316/L, 316Ti, 317/L, 321/H, 347/H, 904/L

Alloy Steel Flanges

A 182 / A 387 F1, F5, F9, F11, F12, F22, F91

Copper Nickel Flanges

UNS C 70600 ( CU -NI- 90/10), C 71500 ( CU -NI- 70/30)

Carbon Steel Flanges

A 105

DIN 2655 / 2656

DIN 86029 / 86030

Specifications

Size:1/2" (15 NB) to 48" (1200NB)

Class: 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS ASA 150#, 2.0MPa, 5.0MPa, 10.0MPa, 15.0MPa, 25.0MPa, 42.0MPa

Standards: ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48

DIN:DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673

 

B.S: BS4504 , BS4504, BS1560, BS10

Additional Information:

• Item Code: SSSF
• Production Capacity: 300
• Delivery Time: As Per Qty
• Packaging Details: Strong Packing

Product Details:

Manufacturer of Class 150 Blind Flange & ASME B16.5 BLRF Flange in India, Buy Carbon steel blind flange at best price in Mumbai

We produce Stainless steel Blind Flange in many sizes and dimensions. Check stainless steel blind flange weight and stainless steel blind flange dimensions before you procure for your project. Also check stainless steel blind flange prices .Our most selling product is 4 inch class 150 304 Stainless Steel blind flange. We also manufacture 8 inch stainless steel blind flange, 6 Inch and 3 Inch SS blind Flange in Class 150, CL 300 and Class 600. Check pressure rating, Sizes, dimensions and weight chart of stainless steel blind plate flanges. Stainless steel Blind flanges manufacturers in india which are commonly used in petrochemical, pipe engineering, public services and water works. class 300 blind flange manufacturer in Mumbai, Maharashtra which is useful for making repairs to a pipeline further up the line. We are largest PN16 blind flange distributors in india In fact, during construction of a pipeline, ASME B16.5 BLRF Flange and ANSI Blind flange stockist in india may be built into the final length of pipe. BLRF flange stockist in india at very low price due to reasonable man hours in India and entire source of high quality Monel 400 Blind Flange at best price available in Mumbai, India. Steel Mart India is slip on blind flange wholesaler in india. We are supplier of threaded blind flange in india. Steel Mart India is EN 1092 blind flange & CS Blind Flange importers in india, Flange BLRF ASME B16.5, Incoloy 800 BLRF Flange in various sizes. 

PN16 blind flange Stockholder in UAE, Distributor of ASME B16.5 blind flange in India

Kanak Metal is reliable stockholder of ANSI B16.5 blind flange in india, Singapore, Philippines, Thailand, Vietnam, Bahrain, India, Malaysia, Indonesia, Kuwait, Oman, Qatar, South Africa, UK, Saudi Arabia (KSA), United Arab Emirates (UAE). We are largest stockist of lap joint blind flange in india at best price as we are one of the largest carbon steel blind flange manufacturers in rajkot, Gujarat. Looking for Stainless Steel 304l BLRF Flange at best price contact us before buying ANSI B16.5 Blind Flange from India or China. stockholder of pn16 blind flange in Mumbai. Call us or mail to sales@steelmarts.com for Latest & Updated price List of Duplex Steel Uns S31803 BLRF Flange, Blind Raised Face Flanges and Stainless steel Blind flange. We have reliable distributor of ASTM B16.5 Blind Flange in india.

Table of Content

• What is Blind Flange?
• Price List of Ring joint Blind Flange
• Class 150 Blind Flange Types
  • ASME B16.5 Blind Flange
  • ASME B16.5 BLRF Flange
  • ANSI B16.5 Pn16 Blind Flange
  • ASME B16.47 Series a Forged Blind Flange
  • ASME B16.47 Series b BLRF Flange
  • ANSI B16.5 Class 150 Blind Flange
  • ASME B16.5 Class 300 Ring joint Blind Flange
  • Class 150 Blind Flange EN 1092-1 Type 02
  • EN 1092-2 PN16 Pn16 Blind Flange
  • Forged Forged Blind Flange
  • AWWA C207 Class d Flat Face Blind Flange
  • MSS SP-44 BLRF Flange
  • Stainless Steel Blind Flange
  • Carbon Steel Blind Flange
  • ANSI Blind Flange
  • NPT Blind Flange
• Specification of BLRF Flange
• Material of Flat Face Blind Flange
• Dimensions of Forged Blind Flange
• Weight Chart Of Pn16 Blind Flange

Additional Information:

• Item Code: KMF
• Production Capacity: 500
• Delivery Time: AS PER CLINT QTY
• Packaging Details: WOODEN BOX

Product Details:

 ASTM A182 Stainless Steel Slip On Flanges, ASTM A240 Stainless Steel Slip On Flanges, ANSI B16.5, ASME B16.47, MSS-SP44, API, AWWA-C207 Stainless Steel Slip On Flanges, ASME SA182 Stainless Steel Slip On Flanges Manufacturer & Suppliers in India. 

Our company is one of the largest Stainless Steel Slip On Flanges Manufacturers & suppliers in India. We produce and manufacture one of the top quality ASME SA182 Stainless Steel Slip On Flanges in different sizes and grades at our one of its kind manufacturing facility. Sanjay Metal India is a well-known name around the globe and our quality ASME SA182 Stainless Steel Slip On Flanges are in huge demand internationally. We are achieving new heights with the help of our in-house capabilities to produce one of the best quality AWWA-C207 Stainless Steel Slip On Flanges.

Moreover, we serve all our clients with fast delivery for all types of Stainless Steel Slip-On the Flanges. We also export Stainless Steel Slip-on Flanges, Stainless Steel Blind Flanges, Stainless Steel Socket Weld Flanges, Stainless Steel Threaded Flanges, Stainless Steel Weld Neck Flanges, and more.

Stainless Steel Slip-On Flanges Specification, Stainless Steel Slip On Flange Size, Stainless Steel Slip On Flange Grades, Steel Slip On Flange Standards:

• Slip-on Flange Dimensions:  ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges etc.
• Slip-on Flange Standards:  ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
• Slip on Flange Class :  150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, DIN Standard ND-6,10, 16, 25, 40 Etc.
• Slip-on Flange Size:  1/8″ NB TO 48″NB.
• Slip-on Flange Flange Face Type:  Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
• Slip on Flange DIN :  DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673
• Slip on Flange ANSI :  ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
• Slip on Flange BS :  BS4504 , BS4504, BS1560, BS10
• Stainless Steel Grades :  ASTM / ASME 201, 202, 301, 304, 304L, 310, 310S, 316L, 316TI, 317, 317L, 321, 347, 409, 409M, 409L, 410, 410S, 420, 430, 431, 441, 444, 446, 17.4PH, 904LAbout Stainless Steel Slip-On Flanges

  Kanak Metal is known as one of the biggest ASTM A182 Stainless Steel Slip On Flanges manufacturers in India. We supply Stainless Steel 316 Flanges of the highest quality to a variety of companies all over the world. Our expertise in heat treatment places us in a strong position to manufacture and export ASME SA182 Stainless Steel Slip On Flanges with specific chemistry and the necessary mechanical properties. Our ASTM A182 Stainless Steel Threaded Flanges are available in a variety of sizes and environments, ranging from 1/2′′ to 48′′ [15MM to 1200 MM]. In India, flanges are often referred to as Stainless Steel 310 Slip-On Flanges, Stainless Steel 316 Slip-On Flanges, Stainless Steel 304 Slip-On Flanges, or Stainless 321 Slip-On Flanges.

• Stainless Steel Slip-On Flanges Packaging and Delivery
  • Stainless Steel 304 Slip-On Flanges Payment Modes: LC (Letter of Credit), TT (Telegraphic Transfer or Wire Transfer), Cheque, and others.
  • Stainless Steel 316 Slip-On Flanges Packaging: SS Slip On Flanges are packaged with caution and safety so they reach our client as well as he would expect. Packaging Charges Extra.
  • Stainless Steel Slip-On Flanges Port of Dispatch: Mumbai or Kalamboli ports in the Maharashtra state of India.
  • Stainless Steel Slip-On Flanges Tax: 18% GST

Additional Information:

• Production Capacity: 500
• Delivery Time: 2-3 DAY
• Packaging Details: WOODEN BOX

Product Details:

 Manufacturer/Exporter Of High Quality Lap Joint (Lj) Forged FlangesCarbon, Alloy, Stainless Steel Lap Joint Flanges

Lap Joint Flanges are similar to other types of industrial flanges, but it does not have a raised face. Lap joint flanges are used in conjunction with a “Lap Joint Stub End”. The total initial cost of a lap joint flange along with a stub end is around one-third higher than that of comparable welding neck flanges. The pressure holding capacity of lap joint flanges is comparatively lower, and the fatigue life for the assembly is only one tenth that of welding neck flanges. The lap joint is favoured in low pressure applications because it is easily assembled and aligned. To reduce cost these stub end lap joint flanges and carbon steel lap joint flanges can be supplied without a hub and/or in treated, coated carbon steel. PIPEFIT is a specialised manufacturer of high quality ASME/ANSI/DIN industrial lap joint flanges in India. We offer immediate delivery programs for standard size carbon steel lap joint flanges and stainless steel lap joint flanges.

Dimensions Lap Joint Flanges & Stud Bolts ASME B16.5

Size: 1/2″ (15 NB) to 48″ (1200NB)

Standards: ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings

Pressure Ratings: Class 150, Class 300, Class 400, Class 600, Class 900, Class1500, Class 2500 | PN6, PN10, PN16, PN25, PN40, PN64 etc.

Carbon Steel Lap Joint Flanges: ASTM A105/A105N, A350 LF1, LF2 CL1/CL2, LF3 CL1/CL2, A694 F42, F46, F48, F50, F52, F56, F60, F65, F70, A516.60, 65, 70 (Spectacle Blind Flange, Spacer Ring/Spade Flange), Steel RST37.2, C22.8

Stainless Steel Lap Joint Flanges: ASTM A182 F202, F304/304L/304H, F316/316L, F316H, F316TI, F310, F321, F904L

Alloy Steel Lap Joint Flanges: ASTM A182 F1, F5, F9, F11, F22, F91

Special Alloy Lap Joint Flanges: Duplex, Super Duplex, Nickel Alloys

Flange Face Type: Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)

Coating/Surface Treatment: Anti-rust Paint, Oil Black Paint, Yellow Transparent, Zinc Plated, Cold and Hot Dip Galvanized

Additional Information:

• Item Code: SSLP
• Production Capacity: 50