Kanak Metal

a known distributor and supplier of ASTM A105 CS Forged Socket Weld Fittings, where a common engineering design criterion is that its corrosion rate should not exceed.  ASTM A105 Carbon Steel Forged Socket Weld Elbow Fittings is similar to the parent metal, but contains 2 % to 2.5 % extra nickel to ensure that the weld metal retains a 50 / 50 phase balance.  This is reflected in the design stresses for ASME SA 105 Carbon Steel Forged Socket Weld Tee Fittings that it is the widely used code for piping. Like all high alloy materials, ASTM A105 Carbon Steel Forged Socket Weld Cap Fittings requires care in welding. It should only be fabricated by qualified welders working to approved procedures. ASME SA 105 Carbon Steel Forged Socket Weld Coupling Fittings is recommended that qualification should be excellent but should include a corrosion test in addition to the usual mechanical and NDE requirements. The curves show that ASTM A105 Carbon Steel Forged Socket Weld Cross Fittings offers superior performance in both dilute and concentrated acids. Only in the range 50 % to 80 wt % acids does ASME SA 105 Carbon Steel Forged Socket Weld Union Fittings offers any improvement. Ganpat Industrial Corporation is one of the well – known exporting firm of ASTM A105 Carbon Steel Forged Socket Weld Plug Fittings, where the iso – corrosion curve for a number of alloys in pure sulphuric acid.Carbon Steel A105 Forged Fittings Specification

Types of Carbon Steel A105 Socket Weld Fittings
ASTM A105 Carbon Steel A105 Socket weld Fitting Prices
Carbon Steel A105 Socketweld Forged Fitting Application Industries
Carbon Steel Socketweld Fitting Test Certificates
ASTM, ASME Carbon Steel A105 Socket weld Fittings Value Added Services
Carbon Steel A105 Forged Fittings Packaging
Carbon Steel A105 Socketweld Popular Searches
Carbon Steel A105 Forged Fitting Supplier
Carbon Steel A105 Forged Socket Weld Fittings Exporter

CS A105 Forged Elbow

 

• Carbon Steel Forged Pipe Fittings A105 B16.11 Elbow
• Carbon Steel Forged Pipe Fittings A105 B16.11 Threaded Elbow
• CS Forged Pipe Fittings A105 B16.11 Elbow
• Carbon Steel Pipe Forged Fittings A105 B16.11 2000# Threaded Elbow
• Carbon Steel Forged Pipe Fittings A105 B16.11 Threaded Elbow Supplier
• Carbon Steel Forged Pipe Fittings A105 B16.11 Elbow Supplier
• CS Forged Pipe Fittings A105 B16.11 Elbow Supplier
• Carbon Steel Forged Pipe Fittings A105 B16.11 Elbow Exporters
• Carbon Steel Forged Pipe Fittings A105 B16.11 Threaded Elbow Exporters
• CS Forged Pipe Fittings A105 B16.11 Elbow Exporters
• Carbon Steel Forged Pipe Fittings A105 B16.11 Elbow Manufacturers
• CS Forged Pipe Fittings A105 B16.11 Elbow Manufacturers
• ASTM A105 Carbon Steel forged Elbow Carbon Steel Forged Fittings Available Types & Shapes

  Carbon Steel Forged Pipe Fittings	Carbon Steel High Pressure Forged Fittings
  Carbon Steel Forged Socket Weld Fittings	Carbon Steel Threaded Pipe Fittings
  Carbon Steel Forged Socket Weld 90 Deg Elbow	Carbon Steel Forged 90 Deg Elbow
  Carbon Steel Forged Socket Weld 45 Degree Elbow	ANSI B16.11 Carbon Steel Screwed 45 Degree Elbow
  Carbon Steel Forged Tee	Carbon Steel Forged Tee
  Carbon Steel Forged Full Coupling	Steel Threaded / Screwed Cross
  Carbon Steel Forged Socket Weld Half Coupling	Carbon Steel Threaded Half Coupling
  Carbon Steel Socket Weld Cross	Carbon Steel Coupling
  Carbon Steel Socket Weld Cap	Carbon Steel Screwed Cap
  ANSI B16.11 Carbon Steel Socket Weld Union	Carbon Steel Threaded / Screwed Union Stockist
  Carbon Steel Screwed Hex Plug	Carbon Steel Square Plug
  Carbon Steel Reducing Tee	Carbon Steel Screwed Bushing
  Carbon Steel Hex Nipples	Carbon Steel Swage Nipple
  Carbon Steel Threaded Street Elbow	Carbon Steel Threaded / Screwed Pipe Nipple
  Carbon Steel Socket weld Unequal Tee	Carbon Steel ASME B16.11 Forged Unequal Tee

Check ASME SA105 Carbon Steel Socket Weld And Threaded Reducing Tee Price List In India.

The ASTM A105 standard covers seamless carbon steel forged fittings. Different fittings made with this specification are great for high and ambient temperatures in a pressure system. The ASTM A105 Carbon Steel Tee helps in connecting pipes to the central pipeline system. This pipe fitting looks like the alphabet ‘T,’ and its connections are made at a 90-degree angle. We are one of the top manufacturers of different types of tees that are customizable according to the client’s requirements. Our SA105 Socket Weld Equal Tee is used in various industries, and we manufacture it following the industrial standards with the help of state-of-art technologies. We are one of the top producers of ASTM A105 Carbon Steel Socket Weld Tee, used as fittings of the pipe having a smaller diameter (nominal diameter is less than equal to NPS 2).

We are one of the top manufacturers of Carbon Steel A105 Threaded Tee, which is very popular in pipe fittings and is available in various dimensions and finishes. In addition, we have a good stock of ASTM A105 Carbon Steel Reducing Tee, which are widely used for reducing the run ports from one to another. We also supply, and export ASTM A105 CS Forged Tee, whose outlet branches are located at a 45-degree angle from the pipeline. No matter which type of ASTM A105 CS Forged Tee is required, contact us to get high-quality customized fittings at an affordable price as per the requirements.CS A105 Forged Tee

CS A105 Forged Tee

• Carbon Steel Forged Pipe Fittings A105 B16.11 Tee
• Carbon Steel Forged Pipe Fittings A105 B16.11 Tee Supplier
• CS Forged Pipe Fittings A105 B16.11 Tee Supplier
• Carbon Steel Forged Pipe Fittings A105 B16.11 Tee Exporters
• CS Forged Pipe Fittings A105 B16.11 Tee Exporters
• Carbon Steel Forged Pipe Fittings A105 B16.11 Tee Manufacturers
• CS Forged Pipe Fittings A105 B16.11 Tee Manufacturers
• Carbon Steel Pipe Forged Fittings A105 B16.11 2000# Threaded Tee Manufacturers
• CS Forged Pipe Fittings A105 B16.11 Tee
• Carbon Steel Forged Pipe Fittings A105 B16.11 Tee Manufacturers
• CS Forged Pipe Fittings A105 B16.11 Tee Manufacturers
• ASTM A105 Carbon Steel Forged Tee

 

Socket Weld 90 Deg Elbow【Technology brief】

ASME B16.11 Forged Socket Weld 90 Deg Elbow

【Materia】

ASTM/ ASME A 105, ASTM/ ASME A 350 LF 2, ASTM / ASME A 53 GR. A & B, ASTM A 106 GR. A, B & C. API 5L GR. B,
API 5L X 42, X 46, X 52, X 60, X 65 & X 70. ASTM / ASME A 691 GR A, B & C

【Size】

 1/8″ NB TO 4″ NB Dimensions : ASME 16.11, MSS SP-79, MSS SP-95, 83, 95, 97, BS 3799

Size : 1/8″ NB TO 4″ NB
Pressure Class : 3000 LBS, 6000 LBS, 9000 LBS
Form : Forged Elbow, 90 Deg Elbow.

Material & Grades of Forged Socket Weld 90 Deg Elbow :

Stainless Steel Forged Socket Weld 90 Deg Elbow :
ASTM A182 F304, F304L, F306, F316L, F304H, F309S, F309H, F310S, F310H, F316TI, F316H, F316LN, F317, F317L,
F321, F321H, F11, F22, F91, F347, F347H, F904L, ASTM A312/A403 TP304, TP304L, TP316, TP316L

Duplex & Super Duplex Steel Forged Socket Weld 90 Deg Elbow :
ASTM A 182 – F 51, F53, F55 S 31803, S 32205, S 32550, S 32750, S 32760, S 32950.

Carbon Steel Forged Socket Weld 90 Deg Elbow :
ASTM/ ASME A 105, ASTM/ ASME A 350 LF 2, ASTM / ASME A 53 GR. A & B, ASTM A 106 GR. A, B & C. API 5L GR. B,
API 5L X 42, X 46, X 52, X 60, X 65 & X 70. ASTM / ASME A 691 GR A, B & C

Alloy Steel Forged Socket Weld 90 Deg Elbow :
ASTM / ASME A 182, ASTM / ASME A 335, ASTM / ASME A 234 GR P 1, P 5, P 9, P 11, P 12, P 22, P 23, P 91, ASTM /
ASME A 691 GR 1 CR, 1 1/4 CR, 2 1/4 CR, 5 CR, 9CR, 91

Copper Alloy Steel Forged Socket Weld 90 Deg Elbow : ASTM / ASME SB 111 UNS NO. C 10100 , C 10200 , C10300 , C 10800 , C 12000, C 12200, C 70600 C 71500, ASTM / ASME SB 466 UNS NO. C 70600 ( CU -NI- 90/10) , C
71500 ( CU -NI- 70/30)

Nickel Alloy Forged Socket Weld 90 Deg Elbow :
ASTM / ASME SB 336, ASTM / ASME SB 564 / 160 / 163 / 472, UNS 2200 (NICKEL 200) , UNS 2201 (NICKEL 201 ) ,
UNS 4400 (MONEL 400 ) , UNS 8020 ( ALLOY 20 / 20 CB 3 ) , UNS 8825 INCONEL (825) , UNS 6600 (INCONEL 600 ) ,
UNS 6601 (INCONEL 601) , UNS 6625 (INCONEL 625) , UNS 10276 (HASTELLOY C 276)

ASME B16.11 Forged Socket Weld 90 Deg Elbow Available Types Technical ParametersANSI/ASME B16.11 SOCKET WELD 90 DEGREE ELBOW DIMENSIONS
NPS 1/2 to 4 – 90°/45° Class 3000 Socket Weld 90 Degree Elbow Dimensions

• ASME B16.11 Socket Weld 90° Elbow Specifications
• Dimensions Of ASME B16.11 Socket Weld 90° Elbow
• Materials of ASME B16.11 Socket Weld 90° Elbow
• Packaging of ASME B16.11 Socket Weld 90° Elbow

SA 105 Carbon Steel Threaded Sockolet Specification List/ Price List And CS ASTM A105 Sockolet Manufacturer In India.
Specification Of ASTM A105 Carbon Steel Sockolet CARBON STEEL THREDOLETS

• ASTM A350 Low Temperature Carbon Steel Thredolets
• ASTM A694 Carbon Steel Thredolets
• Carbon Steel ASTM A694 F42 Thredolet
• CS ASTM A694 F46 Thredolet Exporter
• ASTM A694 Grade F50 Thredolet Dealers
• Carbon Steel ASTM A694 F52 Thredolets
• Carbon Steel ASTM A694 F56 Thredolets
• ASTM A694 F65 Thredolet in Mumbai
• ASTM A105 Carbon Steel Thredolets Manufacturer
• ASTM A350 LF2 LTCS Thredolet Supplier
• ASME SA350 LF3 Carbon Steel Thredolet
• ASTM A694 F70 High Yield Carbon Steel Thredolet in India
• CS A105 / SA105 Thredolet in India
• ASTM A105 CS Thredolets Manufacturer
• ASTM A350 LF2 / LF3 Thredolets

ASTM A105 Carbon Steel Forged Fittings, ASTM A105 Carbon Steel Threaded Fittings, Carbon Forged Fittings, Carbon Steel Forged Threaded 90 deg Elbow, ASTM A105 Carbon Steel Socket Weld Fittings Supplier, Carbon Steel Socket Weld Equal Tee, ASTM A350 LF2 Low Temperature Carbon Steel Forged Fittings, ASTM A350 Carbon Steel Low Temp. LF2 Forged Tee Exporter, Carbon Steel Forged Fittings Manufacturer in India.

It is best known as corrosion cracking fittings. These Carbon Steel Socket Weld  Elbow are less machineable as compared to other carbon grades. It offers excellent corrosion resistant properties. It can be fabricated very well. These fittings have high chemical, physical, and mechanical properties which make it high quality, and a demanding product.

These Forged Fittings are used in various industries like the petrochemical industry, oil and gas industry, power generation plants, bulk liquid transportation, chemical industry, pharmaceuticals industry and equipments etc.

Table Of ContentTypes of Carbon Steel Forged FittingsCarbon Steel Forged ElbowCarbon Steel Forged TeeCarbon Steel Forged CrossCarbon Steel Forged Full CouplingCarbon Steel Forged Half CouplingCarbon Steel Forged Pipe CapCarbon Steel Forged UnionCarbon Steel Forged BushingCarbon Steel Forged NippleCarbon Steel Forged Fittings Standard SpecificationCarbon Steel Forged Fittings Application IndustriesLatest Price List of Carbon Steel Forged FittingsPeople Also Searched forCarbon Socket Weld 90 deg Elbow Trader, Carbon Steel Hex Bushing, Carbon Socket Weld Union Stockists, ASTM A105 Carbon Steel High Pressure Forged Pipe Fittings, Carbon Steel Plug Dealer, Carbon Forged Pipe Fittings, ASME SA350 Carbon Steel Forged Fittings Supplier in India.

CS Forged Elbow

• Carbon Steel Forged Pipe Fittings B16.11 Elbow
• Carbon Steel Forged Pipe Fittings B16.11 Threaded Elbow
• MS Forged Threaded Elbow
• Carbon Steel Pipe Forged Fittings B16.11 2000# Threaded Elbow
• Carbon Steel Forged Pipe Fittings B16.11 Threaded Elbow Supplier
• Carbon Steel Forged Pipe Fittings B16.11 Elbow Supplier
• CS Forged Pipe Fittings B16.11 Elbow Supplier
• Carbon Steel Forged Pipe Fittings B16.11 Elbow Exporters
• Carbon Steel Forged Pipe Fittings B16.11 Threaded Elbow Exporters
• CS Forged Pipe Fittings B16.11 Elbow Exporters
• Mild Steel Forged Elbow Manufacturers
• CS Forged Pipe Fittings B16.11 Elbow Manufacturers

 

Standard Specication For Forged Socket Weld 90 Deg Elbow

Dimensions : ASME 16.11, MSS SP-79, MSS SP-95, 83, 95, 97, BS 3799
Size : 1/8″ NB TO 4″ NB
Pressure Class : 3000 LBS, 6000 LBS, 9000 LBS
Form : Forged Elbow, 90 Deg Elbow.

 

Carbon Steel Forged Fittings Manufacturer of ASTM A105 Forged Fittings in Mumbai, India, A105 3000lbs NPT Coupling suppliers.Free ASTM A105 NPT & Carbon Steel ASTM A105 Fittings Price List India, ASTM A105 ASME B16.11 3000# MSS-SP-83 Half NPT Thread Coupling manufacturer in India.
ASTM A105 Socket Weld Fittings, CS A105 Socketweld Fitting, ASTM A105 Carbon Steel Socket weld Fitting, ASME SA105 Socketweld Fitting, ASTM A105 Forged Fitting Manufacturer and Suppliers in India.Carbon Steel ASTM A105 Socketweld Fittings Types ASTM A105 Socket Weld 45 Degree Elbow, ASTM A105 Socket Weld 90 Degree Elbow, ASTM A105 Socket Weld Full Coupling Exporter, ASTM A105 Socket Weld Half Coupling, ASTM A105 Socket Weld Reducing Coupling, ASTM A105 Socket Weld Tee, ASTM A105 Socket Weld Union, ASTM A105 Socket Weld Cap, ASTM A105 Socket Weld Reducer Insert, ASTM A105 Socket Weld Cross, ASTM A105 Socket Weld Plug, ASTM A105 Socket Weld Boss, ASTM A105 Socket Weld Bushing Master Stockist in India.

 

ASTM A105 Socket Weld Fittings / CS ASTM A105 Socket weld Fittings - 

• What is ASTM A105 Socket weld Fitting
• ASTM A105 Socket weld Fitting Available Range
• ASTM A105 Socket weld Fitting Chemical Composition and Mechanical Properties
• ASTM A105 Socket weld Fitting Application and Usage
• ASTM A105 Socket weld Fitting Available Offer and Discount Best Price
• ASTM A105 Socket weld Fitting Types
• ASTM A105 Socket weld Fitting Export Countries
• ASTM A105 Socket weld Fitting Supplying States and Citie

 

Carbon Steel Forged Fittings Manufacturers in IndiaCarbon Steel Threaded Pipe Fitting, Carbon Steel Socket weld FittingsCarbon Steel Forged Elbow, Carbon Steel Threaded Tee, ANSI B16.11 Carbon Steel Socket Weld Union, Carbon Steel Socket Weld Cross, ASME B16.11 Carbon Steel Threaded BushingBS3799 CS Socket Weld Cap, Carbon Steel Threaded Coupling, Carbon Steel 3000 LB Forged Screwed Fittings,Carbon Steel Class 6000 Threaded Plug Price in India

• What is Carbon Steel Forged Fittings
• Forged Carbon Steel Fittings Standard Specification
• Different Forms of Carbon Steel Forged Threaded / Scoket Weld Fittings
  • Carbon Steel Forged Socket Weld Tee
  • Carbon Steel Forged Socket Weld Cross
  • Carbon Steel Socket Weld Cap
  • Carbon Steel Forged 90 Degree Elbow
  • Carbon Steel Forged 45 Degree Elbow
  • Carbon Steel Forged Socket Weld Half Coupling
  • Carbon Steel Forged Socket Weld Full Coupling
  • Carbon Steel Threaded / Screwed Union
  • Carbon Steel Threaded / Screwed Hex Plug
  • Carbon Steel Threaded / Screwed Bushing
  • Carbon Steel Threaded / Screwed Pipe Nipple
  • Carbon Steel Threaded / Screwed Street Elbow
• Forged Carbon Steel Socket Weld Fittings Weight Chart
• Carbon Steel Socket Weld Fittings Dimensions
• Carbon Steel Socket Weld / Threaded Fittings Available Types

• Carbon Steel Socket Weld Fittings

  Carbon Steel 90 Deg Socket Weld Elbow Fittings Carbon Steel 45 Deg Socket Weld Elbow CS Threaded / Socket Weld Equal Tee Carbon Steel Socket Weld Unequal Tee Fittings CS Socket Weld Equal Cross Fittings CS Forged Socket Weld Unequal Cross Carbon Steel Socket Weld Coupling CS Forged Socket Weld Half Coupling Forged Carbon steel Socket Weld Pipe Cap Forged Socket Weld Union Fittings Carbon Steel Socket Weld Reducer Insert Fittings Carbon Steel Forged Socket Weld Boss Fittings Carbon Steel Forged Socket Weld Fittings Forged Carbon Steel Fittings Carbon Steel Threaded Street Elbow Fittings Carbon steel Threaded Bushing Carbon Steel 90 Deg Screwed-Threaded Elbow Fittings

  Carbon Steel 90 Deg Socket Weld Elbow Outlet Carbon Steel Socket Weld Boss Fittings Carbon steel Socket Weld Lateral Outlet Fittings Carbon Steel Threaded Fittings CS 90 Deg Elbow Outlet Fittings Carbon Steel Forged Lateral Outlet Fittings Carbon Steel Nipple Branch Outlet Fittings Carbon Steel Forged Socket Weld Fittings CS Socket Weld Pipe Nipples Carbon Steel Socket Weld Pipe Outlet Fittings CS Socket Weld Swage Nipples | Pipe Swage Socket Weld Branch Outlet Fittings Forged Socket Weld fittings Carbon steel Forged Fittings Carbon Steel Threaded Bull Plug Carbon Steel Threaded Union Carbon Steel Threaded Pipe Nipple Carbon Steel Threaded Plug

   s one of the leading manufacturer and supplier of Carbon Steel ANSI B16.11 Forged Fittings, ASTM A105 Carbon Steel Threaded Fitting, Carbon Steel ASME SA 350 LF2 Class 3000 Forged Screwed Fitting, Carbon Steel Class 2000 Forged Fittings, Carbon Class 6000 Forged Socket weld Fittings, ASTM A105 Carbon Steel ANSI 3000 Lbs Coupling, ASME SA 350 Carbon Steel LF2 Class 9000 Forged Fittings at the best price in India.

• ANSI / ASME B16.11 Socket Weld Tee
• Manufacturer of ANSI B16.11 SS 6000# Sw Tee in Mumbai, India, Tee 3000# Sw Suppliers.

• What is ASME B16.11 Socket Weld Tee?
• Socket Weld Tee Price List
• ASME B16.11 Socket Weld Tee Fittings Specification
• Forged Socket Weld Tee 45 Degree Material
• ASME B16.9 45 Deg Socket Weld Tee Types
  • Class 3000 elbow, socket weld tee
  • Class 6000 elbow, socket weld tee
  • Class 9000 elbow, socket weld tee
  • B16.11 socket weld tee
  • ASTM A105 socket weld tee
  • A182 tee socket weld tee
  • ASTM A350 socket weld tee
  • A182 Gr F304 forged tee
  • A182 Gr socket weld tee
  • A182 Gr F321 socket weld tee
  • A182 Gr F347 socket weld tee
  • A350 Gr LF2 sw tee
  • 
    

  • Types of ASME B16.11 Socket Weld Fittings :

    • ASME B16.11 Socket Weld 90° Elbow
    • ASME B16.11 Socket Weld 45° Elbow
    • ASME B16.11 Socket Weld Tee
    • ASME B16.11 Socket Weld Cross
    • ASME B16.11 Socket Weld 1D Elbows
    • ASME B16.11 Socket Weld 1.5D Elbows
    • ASME B16.11 Socket Weld 3D Elbows
    • ASME B16.11 Socket Weld 5D Elbows
    • ASME B16.11 Socket Weld Full Coupling
    • ASME B16.11 Socket Weld Half Coupling
    • ASME B16.11 Socket Weld Pipe Cap
    • ASME B16.11 Socket Weld Boss
    • ASME B16.11 Socket Weld Reducer Insert
    • ASME B16.11 Socket Weld Pipe Nipple
    • ASME B16.11 Socket Weld Branch Outlet
    • ASME B16.11 Socket Weld 90° Elbow Outlet
    • ASME B16.11 Socket Weld 45° Lateral Tee
    • ASME B16.11 Socket Weld Lateral Outlet
    • ASME B16.11 Socket Weld Socket Weld Reducers
    • ASME B16.11 Socket Weld Socket Weld Concentric Reducers
    • ASME B16.11 Socket Weld Socket Weld Eccentric Reducers
    • ASME B16.11 Socket Weld Socket Weld Equal Tee
    • ASME B16.11 Socket Weld Socket Weld Unequal Tee
    • ASME B16.11 Socket Weld Socket Weld Adapters
    ASME B16.11 Socket Weld Socket Weld Union

Carbon Steel Socket weld Full Coupling Manufacturer, Exporter in IndiaCS A105 B16.11 2000# Socket weld Full Coupling Manufacturers, Carbon Steel A105 B16.11 3000# Socketweld Full Coupling, Carbon Steel ASTM A105 Socketweld Full Couplings, Carbon Steel Forged Pipe Fittings A105 B16.11 Socket Weld Full Coupling, CS Socketweld Full Couplings Dealer in India, CS Forged Pipe Fittings A105 B16.11 Socketweld Full Couplings, Carbon Steel Forged Pipe Fittings A105 B16.11 Socketweld Full Coupling Supplier, Carbon Steel Socket Weld Full Coupling, MS Forged Socketweld Full Coupling Manufacturers, CS 3000 LBS Socketweld Full Couplings, Mild Steel Forged Socket weld Full Coupling, Carbon Steel A105 Socket weld Full Couplings Manufacturer in Mumbai India.

Kanak Metal is one of the well-known manufacturers of Carbon Steel Forged Socket Weld Full Coupling, which is known for delivering smoothly featured bore and satisfactory fluid flow. We manufacture Carbon Steel Forged Socket Weld Full Coupling in accordance to industry norms and using advanced technology. Mild Steel Forged Socket Weld Full Coupling find use in include construction, roofing, container manufacturing, ventilation ducts, water tanks, etc. With rich industry experience and knowledge, we are offering a qualitative range of Carbon Steel Forged Socket Weld Full Coupling that is broadly utilized in the construction, automobile industry and railways. Carbon Steel A105 Forged Socket Weld Full Coupling has features like Excellent finish, Reasonable prices, Long service life, Robust design, High strength, Sturdy construction, and more. Precision engineered using advanced techniques; the assortment of CS Forged Socket Weld Full Coupling is appreciated for resistance to corrosion, precise dimension and sturdiness.

 

ASME B16.11 Socket Weld Tee , ASME B16.11 Socket Weld Tee Dimensions , Pipe FittingsManufacturer , Exporter & Supplier of ASME B16.11 Socket Weld Tee , ASME B16.11 Socket Weld Tee Dimensions ,Socket Weld Tee , Socket Weld FittingsASME B16.9 Socket Weld Tee , ASME B16.11 Socket Weld Tee Dimensions, ASME B16.11 Socket Weld Tee at best price with high quality

• ASME B16.11 Socket Weld Tee Specifications
• Dimensions Of ASME B16.11 Socket Weld Tee
• Materials of ASME B16.11 Socket Weld Tee
• Packaging of ASME B16.11 Socket Weld Tee

NSI / ASME B16.11 Socket Weld TeeManufacturer of ANSI B16.11 SS 6000# Sw Tee in Mumbai, India, Tee 3000# Sw Suppliers.Check KS B 1542 Socket Weld Tee Dimensions & ASME B16.11 Forged 45 Degree Socket Weld Tee Price List, 3000# Sw Tee manufacturer in India.

A 45 Degree Tee 3000lb Socket Weld, is one of the most common type of pipe fitting used to both combine or divide fluid flow. The Asme B16.9 45 Deg Socket Weld Tee is available with solvent-weld sockets or female thread sockets, opposed solvent-weld sockets as well as a female-threaded side outlet. Stainless Steel Socket Weld 45 Deg. Tee can be utilized to connect pipes of different diameters. In fact, these Socket Weld Long Radius 45 Degree Tees could be used to change the direction of a pipe run. Or they could be used to do both. The Forged Socket Weld Tee 45 Degree is available in a variety of sizes materials,  and finishes. These Ansi B16.9 45 Deg Forged Socket Weld Tee may also be used to transport two-fluid mixtures. 45° Short Radius Socket Weld Tee may be produced either equal or unequal in size of their three connections, with equal tees being the most commonly utilized fittings amongst them. 

Application industries such as petrochemicals, power generation, ship building, chemical, pharmaceuticals. We produce the following Socket Weld Tee Dimensions - ASME 16.11, MSS SP-79, MSS SP-95, 83, 95, 97, BS 3799. Size for the Ansi B16.9 45 Deg Forged Socket Weld Teeranges from 1/8 inch NB TO 4 inches NB.

Specifications of ASME B16.11 Socket Weld Tee

Stainless Steel ASME B16.11 Socket Weld Tee | Carbon Steel ASME B16.11 Socket Weld Tee | Nickel Alloys ASME B16.11 Socket Weld Tee

 

Size : 1/2"NB TO 4"NB IN

Class : 3000 LBS, 6000 LBS, 9000 LBS

Type : Socket Weld (S/W) & SCREWED (SCRD) – NPT, BSP, BSPT

Form : 45 Deg Elbow, 90 Deg Elbow, Forged Elbow, Threaded Elbow, Socket Weld Elbow.

1. CS A105 Forged Tee
2. Carbon Steel Forged Pipe Fittings A105 B16.11 Tee
3. Carbon Steel Forged Pipe Fittings A105 B16.11 Tee Supplier
4. CS Forged Pipe Fittings A105 B16.11 Tee Supplier
5. Carbon Steel Forged Pipe Fittings A105 B16.11 Tee Exporters
6. CS Forged Pipe Fittings A105 B16.11 Tee Exporters
7. Carbon Steel Forged Pipe Fittings A105 B16.11 Tee Manufacturers
8. CS Forged Pipe Fittings A105 B16.11 Tee Manufacturers
9. Carbon Steel Pipe Forged Fittings A105 B16.11 2000# Threaded Tee Manufacturers
10. CS Forged Pipe Fittings A105 B16.11 Tee
11. Carbon Steel Forged Pipe Fittings A105 B16.11 Tee Manufacturers
12. CS Forged Pipe Fittings A105 B16.11 Tee Manufacturers ASTM A105 Carbon Steel Forged Tee
13. • What is ASME B16.11 Socket Weld Tee?
    • Socket Weld Tee Price List
    • ASME B16.11 Socket Weld Tee Fittings Specification
    • Forged Socket Weld Tee 45 Degree Material
    • ASME B16.9 45 Deg Socket Weld 
      •  
    • Socket Weld Tee Dimensions
    • Class 6000 Socket Weld Tee Dimensions NPS 1/2 to 2
    • Equal Tee SCH10 Weight Chart
    • Manufacturing Standards of ASME B16.11 Socket Weld Te

ASME B16.11 Forged Fittings Manufacturer in India Forged Pipe Fittings Manufacturing Standards Forged Fittings Materials and Grades General Manufacturing Process of Forged Fittings

Forged Fittings in hot closed die forging: forging billet blanking, punching, correction, intermediate inspection (check the size and surface defects of forged fittings), heat treating forged fittings to eliminate forging stress, improve performance of metal cutting, forging billet heating, roll forging, die forging forming, trimming cutting, clear up (mainly to remove surface scale, inspection. Generally forged fittings must pass through chemical composition testing, appearance and hardness test, mechanical properties, and NDT Testing, etc.

ASME B16.11 Forged Pipe Fittings Dimensions

 FORGED ELBOWS

• Carbon Steel Socket Weld Elbows Stockist
• Carbon Steel 45 Deg Threaded Elbows
• Carbon Steel BSPT Threaded Elbows Manufacturer
• CS Forged Elbow
• Carbon Steel 90 Deg Forged Elbows
• Carbon Steel Forged Elbows Supplier
• ANSI B16.11 Carbon Steel Forged Elbows
• Carbon Steel NPT Screwed Elbow
• Carbon Steel 90 Degree Forged Elbow Exporter
• Forged CS Elbows
• Carbon Steel Forged Elbows

SPECIFICATION

Standards : ASME 16.11, MSS SP-79, MSS SP-95, 83, 95, 97, BS 3799

Size: 1/8″~4″ (DN6~DN100)

Class/Pressure: 3000 LBS, 6000 LBS, 9000 LBS

Carbon Steel 90 Deg Socket weld Elbow: ASTM A105/A105N

Test Certificates: Manufacturer Test Certificate as per EN 10204 / 3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report

Carbon Steel Forged Pipe Fittings A105 B16.11 Socketweld 90 Degree Elbow Exporters, Carbon Steel Forged Socket Weld 90 Degree Elbow, Carbon Steel Forged Pipe Fittings A105 B16.11 Socket Weld 90 Degree Elbow Manufacturers, MS Forged 90 Degree Socketweld Elbow, Mild Steel Forged 90 Deg. Socket weld Elbow Manufacturers, Carbon Steel A105 B16.11 2000# Socketweld 90 Degree Elbow, CS A105 B16.11 3000# Socket weld 90 Degree Elbow Manufacturers, Carbon Steel 90 Deg Socketweld Elbow, Carbon Steel A105 90 Deg Socket weld Elbow, ASME 16.11 Carbon Steel 90 degree Socket weld Elbow Exporters in India.

• What is Carbon Steel Forged Fittings
• Forged Carbon Steel Fittings Standard Specification
• Different Forms of Carbon Steel Forged Threaded / Scoket Weld Fittings
  • Carbon Steel Forged Socket Weld Tee
  • Carbon Steel Forged Socket Weld Cross
  • Carbon Steel Socket Weld Cap
  • Carbon Steel Forged 90 Degree Elbow
  • Carbon Steel Forged 45 Degree Elbow
  • Carbon Steel Forged Socket Weld Half Coupling
  • Carbon Steel Forged Socket Weld Full Coupling
  • Carbon Steel Threaded / Screwed Union
  • Carbon Steel Threaded / Screwed Hex Plug
  • Carbon Steel Threaded / Screwed Bushing
  • Carbon Steel Threaded / Screwed Pipe Nipple
  • Carbon Steel Threaded / Screwed Street Elbow
• Forged Carbon Steel Socket Weld Fittings Weight Chart
• Carbon Steel Socket Weld Fittings Dimensions
• Carbon Steel Socket Weld / Threaded Fittings Available Types
• Carbon Steel Forged Fittings Export To

ASTM A105 CARBON STEEL FORGE FITTINGSCarbon Steel A105 Threaded Forged FittingsCarbon Steel A105 Socket Weld Fittings, ASTM A105 Carbon Steel Socketweld Elbow, ASME SA105 Carbon Steel Socket weld Tee, A105 Carbon Steel Socketweld Cap Manufacturer and Suppliers In Mumbai, India.Carbon Steel Threaded Forged Coupling Exporter, Carbon Steel A105 Threaded Forged Cross, Carbon Steel A105 Threaded Bushing, Carbon Steel A105 Threaded Forged Pipe Elbow, Carbon Steel A105 Hex Plug, A105 Carbon Steel Forged Threaded forged 90deg. Elbow, A105 Carbon Steel Threaded Forged Tee Exporter in India.

Carbon Steel Forged Pipe Fittings A105 B16.11 Tee, Carbon Steel Pipe Forged Fittings A105 B16.11 3000# Threaded, Carbon Steel Forged Pipe Fittings A105 B16.11 Cap Exporters, Carbon Steel Pipe Forged Fittings A105 B16.11 3000# Threaded Supplier, Carbon Steel A105 Forged Fittings Exporters, Carbon Steel Forged Pipe Fittings A105 B16.11 Cap, Carbon Steel Forged Pipe Fittings A105 Boss Manufacturers, Stockist of Carbon Steel A105 Forged Fittings, Carbon Steel A105 Forged Elbow Dealer in India, Global Supplier of A105 CS Forged Fittings, Carbon Steel Screwed Forged Fitting Leading Stockholders in Mumbai India.

Specifications: ASTM A105 / ASME SA105

Dimensions: ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799

Size: 1/8” NB to 4” NB (Socketweld & Screwed-Threaded)

Type: Socketweld Fittings/Screwed-Threaded Fittings

Class: 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS

 Carbon Steel Threaded Pipe Fitting, Carbon Steel Socket weld FittingsCarbon Steel Forged Elbow, Carbon Steel Threaded Tee, ANSI B16.11 Carbon Steel Socket Weld Union, Carbon Steel Socket Weld Cross, ASME B16.11 Carbon Steel Threaded Bushing  ASTM A105 Carbon Steel Forged Fittings, ASTM A105 Carbon Steel Threaded Fittings, Carbon Forged Fittings, Carbon Steel Forged Threaded 90 deg Elbow, ASTM A105 Carbon Steel Socket Weld Fittings Supplier, Carbon Steel Socket Weld Equal Tee, ASTM A350 LF2 Low Temperature Carbon Steel Forged Fittings, ASTM A350 Carbon Steel Low Temp. LF2 Forged Tee Exporter, Carbon Steel Forged Fittings Manufacturer in India.Types of Carbon Steel Forged FittingsCarbon Steel Forged ElbowCarbon Steel Forged TeeCarbon Steel Forged CrossCarbon Steel Forged Full CouplingCarbon Steel Forged Half CouplingCarbon Steel Forged Pipe CapCarbon Steel Forged UnionCarbon Steel Forged BushingCarbon Steel Forged NippleCarbon Steel Forged Fittings Standard SpecificationCarbon Steel Forged Fittings Application IndustriesLatest Price List of Carbon Steel Forged Fittings

 

ASTM A105 Fittings manufacturer in IndiaCarbon Steel A105n High Pressure Threaded Fittings and ASME SA 105 Forged Fittings supplier in MumbaiASTM A105N Carbon Steel Forged Elbow, BS3799 Carbon Steel Forged Tee, ANSI B16.11 Carbon Steel A105N Threaded Union, ASTM A105 Forged Fittings, ANSI B16.28 Carbon Steel A105N BushingMSS SP-79/ 83/ 95/ 97 A105 CS Socket Weld Cap, Carbon Steel A105 Threaded Full Coupling, ASTM A105 Carbon Steel 3000 LB Forged Screwed Fittings, Carbon Steel ASTM A105 Class 6000 Threaded Plug Price in India 

• What is ASTM A105 Carbon Steel Forged Fittings
• Carbon Steel ASTM A105 Forged Fittings standard Specification
• Forged Carbon Steel A105 Fittings Manufacturing Standards
• Different Forms of ASTM A105/A105N Carbon Steel Pipe Fittings
  • ASTM A105 Carbon Steel Forged Socket Weld Tee
  • ASTM A105 Carbon Steel Forged Socket Weld Cross
  • ASTM A105 Carbon Steel Socket Weld Cap
  • ASTM A105 Carbon Steel Forged 90 Degree Elbow
  • ASTM A105 Carbon Steel Forged 45 Degree Elbow
  • ASTM A105 Carbon Steel Forged Socket Weld Half Coupling
  • ASTM A105 Carbon Steel Forged Socket Weld Full Coupling
  • ASTM A105 Carbon Steel Threaded / Screwed Union
  • ASTM A105 Carbon Steel Threaded / Screwed Hex Plug
  • ASTM A105 Carbon Steel Threaded / Screwed Bushing
  • ASTM A105 Carbon Steel Threaded / Screwed Pipe Nipple
  • ASTM A105 Carbon Steel Threaded / Screwed Street Elbow
• ASTM A105 Fittings Chemical Composition
• Carbon Steel Fittings ASTM A105 Mechanical Properties
• Carbon Steel ASTM A105 Socket Weld / Threaded Fittings Available Types

FORGED CARBON STEEL A105 FITTINGS

Below are mostly used forged fittings, click on below links to get dimensions & diagrams of ASTM A105/A105N carbon steel forged fittings:

Table of contents

• What is ASME B16.11 Socket Weld Union?
• ASME B16.11 Union Price List
• Socket Weld Union Fitting Specification
• ASME B16.11 Forged Socket weld Union Material
• ASME B16.11 Socket Weld Union Types
  • Class 3000 elbow, socket weld union
  • Class 6000 elbow, socket weld union
  • Class 9000 elbow, socket weld union
  • B16.11 socket weld union
  • ASTM A105 socket weld union
  • A182 socket weld union
  • ASTM A350 socket weld union
  • A182 Gr F304 forged socket weld union
  • A182 Gr socket weld union
  • A182 Gr F321 socket weld union
  • A182 Gr F347 socket weld union
  • A350 Gr LF2 sw union ASME B16.11 Union manufacturers, JIS B 2316 3000 lb Socket Weld Union Exporter in India, Union 3000lb NPT mss-sp-83 stockholder, NPS 1/2 to 2 SS Socket Weld Pipe Union Price List in Mumbai.

    Duplex Steel Socket weld Union is a kind of pipe fitting, and can be explained as a part that is used in a piping system. Although welding this type of fitting to the pipe would ensure that the both the pipe and union are permanently leakproof.
    the socket weld union stainless steel are available in the following sizes -  NPS ½ inch through 4 inches. Most manufacturers produce the stainless steel socket weld union in the following pressure Classes i.e. -  2000#, 3000#, 6000#, 9000# and 10000#. To get the correct sized product for your end use, refer to the socket weld union weight chart given in the link here.
    the ends of the socket weld union fitting is generally a Forged Socket Weld.
    There are several advantages of using a ASME B16.11 Forged Socket weld Union (Male x Female)

    • A socket weld pipe union is very economical.
    • All socket weld union which are available in the market are easy to install.
    • When used, a ASME B16.11 union could easily remove the joint between two pipes.
    • Further, according to the end use or as ordered by the buyer, different socket weld union dimensions  can be used to join 2 different pipes of different size.
    • Additionally, Duplex Steel Socket weld Union could be used to connect a piping system to vessels
    • One of the main advantages of using a ANSI B16.11 union is that they tend to provide a leak-proof disconnection point in any pipe system.

    Features of the ASME B16.11 Socket Weld Union includes  -

    •  
      • Forged Socket weld Union has an excellent resistance to corrosion. A property which is important when these Stainless Steel Socket weld Union are used in piping systems. Since these fittings have excellent resistance to corrosion, the alloy is able to easily withstand damages that could caused by chemical reactions and oxidations.
      • The other important feature of a BS3799 Socketweld Forged Union (Male x Female) is that they tend to be much durable. Enhanced durability plus corrosion resistance, means longer service life, which in turn is cost effective. Again the cost effectiveness of the alloy is dependent on the material used to manufacture these Forged Union 3000LB Socket Weld.
      • ANSI B16.11 Forged Socket weld Union also  

• SSocket Weld Union Dimensions
• Manufacturing Standards of Stainless Steel Socket weld Union
• Socket Weld Union Weight Chart
• Forged Union 3000LB Socket Weld Dimensions
• Class 6000 Socket Weld Union Dimensions
• Class 9000 Socket Weld Union Dimensions

 has been a pioneer in the manufacturing of A105 weldolets (also known as welding outlets). Our precision machinery and state of the art facilities enables us to produce these weldolets in superior quality and precise dimensions. We have been leading the manufacturing of A105 weldolets since the 90's. All these years have enhanced our capabilities and enabled us to produce all kinds of standard A105 weldolets as well as custom A105 weldolets as per customer's specifications. A105 Weldolets are a member of carbon steel branch connection fittings and are generally used in the non-availability or absence of a standard tee. We have numerous combinations of sizes readily available in large number of stocks. We also manufacture flat A105 weldolets to be used on flat surfaces. Weldolets are available in the following specifications:

​

Dimension Standards of weldolet / Weldolet dimension standards

ASME 16.11 Weldolets, MSS SP-97 Weldolets, BS 3799 Weldolets

​

Run Sizes

1/2" to 48"

​

Branch Sizes

1/2" to 24"

​Stainless Steel Welding Outlets / Weldolet® :

ASTM A182 F304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L.
ASTM A182 F304, F304L, F316 and F316L are main grades

Carbon Steel Welding Outlets / Weldolet® :
ASTMA 105/A694/ Gr. F42/46/52/56/60/65/70.
NPT Threads conform to ASME B1.20.1, NACE MR-01-75.
ASTM/ASME A105/ SA 105N The dimensions for forged carbon steel fittings conform to ASME B16.11

Alloy Steel Welding Outlets / Weldolet® :
ASTM / ASME A/SA 182 F1/F5/F9/F11/F22/F91.
A105/A105N Forged Outlets, A182 Forged Outlets

Low Temperature Carbon Steel Welding Outlets / Weldolet® :
ASTM A350 LF3/A350 LF2

Nickel Alloy Welding Outlets / Weldolet® :
ASTM / ASME SB 564 / 160 / 472 – UNS 10276 (HASTELLOY C 276 Welding Outlets / Weldolet®), UNS 2200 (NICKEL 200 Welding Outlets / Weldolet®), UNS 2201 (NICKEL 201 Welding Outlets / Weldolet®), UNS 4400 (MONEL 400 Welding Outlets / Weldolet®), UNS 8020 (ALLOY 20 Welding Outlets / Weldolet®), UNS 8825 (INCONEL 825 Welding Outlets / Weldolet®), UNS 6600 (INCONEL 600 Welding Outlets / Weldolet®), UNS 6601 (INCONEL 601 Welding Outlets / Weldolet®), UNS 6625 (INCONEL 625 Welding Outlets / Weldolet®), INCOLOY

Duplex & Super Duplex Welding Outlets / Weldolet® :
ASTM / ASME A/SA 182 UNS F 44, F 45, F51, F 53, F 55, F 60, F 61.

ANSI / ASME B16.11 Socket Weld CouplingManufacturer of Stainless Steel Socket Weld Coupling in India, ANSI B16.11 Socket Weld Half Coupling suppliers  Forged Coupling Price in India, Forged Half Coupling Manufacturer, ASME B16.11 Forged Steel Coupling stockist in Mumbai, India.

Table of Content

• What is ASME B16.11 Socket Weld Coupling ?
• Socket Weld Half Coupling Dimensions
• Socket Weld Half Coupling Specification
• ASME B16.11 Socket Weld Coupling Types
  • Class 3000 elbow, socket weld half coupling
  • Class 6000 elbow, socket weld half coupling
  • Class 9000 elbow, socket weld half coupling
  • B16.11 socket weld half coupling
  • ASTM A105 socket weld half coupling
  • A182 socket weld half coupling
  • ASTM A350 socket weld half coupling 
  • ASTM A105 Socket Weld Coupling
  • ASME SA105 Socket Weld Half Coupling
  • DIN 1.0402 SW Coupling Class 150
  • DIN 1.0460 SW Coupling Class 150
  • DIN 1.0619 Forged Half Coupling
  • ASTM A105N Forged Pipe Coupling
  • ASME SA105N Forged Steel Half Coupling
  • ASTM A350 LF2 Socket Weld Pipe Coupling
  • ASME SA350 Socket Weld Pipe Coupling
  • High Yield CS ASTM A694 Socket Weld Coupling Class 150

 

•  
  • A182 Gr F304 forged socket weld half coupling
  • A182 Gr socket weld half coupling
  • A182 Gr F321 socket weld half coupling
  • A182 Gr F347 socket weld half coupling
  • A350 Gr LF2 sw half coupling
• Forged Half Coupling Material
• ASME B16.11 Coupling Price List
• Forged Steel Half Coupling Weight Chart 
  • ASTM A105 Carbon Steel Full Coupling
  • A105 Carbon Steel Socket weld Full Coupling
  • SA105 Carbon Steel Threaded Full Coupling
  • SA105N Carbon Steel Socket weld Coupling
  • ASME SA105 Carbon Threaded Coupling
  • A105 Carbon Forged Full Coupling
  • ASTM A105N Carbon Steel Full Coupling
  • A105N Carbon Steel Full Coupling
  • ANSI B16.11 Carbon Steel Full Coupling

   

  • ASTM A105 Carbon Steel Half Coupling
  • A105 Carbon Steel Socket weld Half Coupling
  • SA105 Carbon Steel Threaded Half Coupling
  • SA105N Carbon Steel Socket weld Coupling
  • ASME SA105 Carbon Threaded Coupling
  • A105 Carbon Forged Half Coupling
  • ASTM A105N Carbon Steel Half Coupling
  • A105N Carbon Steel Half Coupling
  • ANSI B16.11 Carbon Steel Half Coupling

   

  • ASTM A105 Carbon Steel Forged Cap
  • A105 Carbon Steel Socket weld Pipe Cap
  • SA105 Carbon Steel Threaded Pipe Cap
  • SA105N Carbon Steel Socket weld Cap
  • ASME SA105 Carbon Threaded Cap
  • A105 Carbon Forged Pipe End Cap
  • ASTM A105N Carbon Steel Pipe Cap
  • A105N Carbon Steel Pipe Cap
  • ANSI B16.11 Carbon Steel Pipe 

ASTM A403 SWAGE NIPPLE SUPPLIERS, ANSI B16.28 ECCENTRIC SWAGE NIPPLE, CONCENTRIC SWAGE NIPPLE, PIPE SWAGE NIPPLE, ANSI B16.28 STAINLESS STEEL SWAGE NIPPLE MANUFACTURER, SS SWAGE NIPPLE, CARBON STEEL SWAGE NIPPLE, ALLOY STEEL SWAGE NIPPLE SUPPLIER IN WORLDWIDE.ASME / ANSI - B 16.9 BUTT WELD SWAGE NIPPLE MANUFACTURER, ALLOY 20 BUTT WELD SWAGE NIPPLE SUPPLIER, HASTELLOY SWAGE NIPPLE EXPORTER, INCONEL SWAGE NIPPLE, HIGH NICKEL SWAGE NIPPLE, MONEL SWAGE NIPPLE SUPPLIER IN INDIA.SWAGE NIPPLE SPECIFICATIONS :

Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.

Dimensions : ANSI B16.9, ANSI B16.28, MSS-SP-43 Type A, MSS-SP-43 Type B, JIS B2312, JIS B2313

Size : 1/2” TO 36” (SEAMLESS UPTO 24”) / (WELDED 8” TO 36” )

Type : male end reducing nipple, concentric, eccentric

 

BUTT WELD SWAGE NIPPLE MATERIAL & GRADES :

Stainless Steel Swage Nipple :

ASTM A403 WP 304/ 304L/ 304H/ 316/ 316L/ 317/ 317L/ 321/ 310/ 347/ 904L

Carbon Steel Swage Nipple :

ASTM A234 WPB / A420 WPL3/ A420 WPL6/ MSS-SP-75 WPHY 42/46/52/56/60/65/70

Alloy Steel Swage Nipple :

ASTM A234 WP1/ WP5/ WP9/ WP11/ WP22/ WP91

Nickel Alloy Swage Nipple :

ASTM / ASME SB 336 UNS 2200 (Nickel 200), UNS 2201 (Nickel 201), UNS 4400 (Monel 400), UNS 8020 (Alloy 20 / 20 CB 3, UNS 8825 Inconel (825), UNS 6600 (Inconel 600), UNS 6601 ( Inconel 601), UNS 6625 (Inconel 625), UNS 10276 (Hastelloy C 276)

Duplex & Super Duplex Steel Swage Nipple :

ASTM A815, ASME SA815 UNS NO S31803, S32205. Werkstoff No. 1.4462

Copper Nickel Swage Nipple :

CuNi10Fe1Mn, CuNi30Mn1Fe.

 

APPLICATIONS INDUSTRY

• Pharmaceutical Equipment
• Chemical Equipment
• Sea Water Equipment
• Heat Exchangers
• Condensers
• Pulp and Paper Industry

• Off-Shore Oil Drilling Companies
• Power Generation
• Petrochemicals
• Gas Processing
• Specialty Chemicals
• Pharmaceuticals